Philip Watkins Agricultural machinery manufacturers, modification and refurbishment specialists
Manufacturers of Agricultural Machinery + Modification and Refurbishment Specialists
Quad-till
Standard features include
- Front depth wheels
- 2 rows of 510mm diameter rubber mounted discs
- Hydraulic auto reset subsoil legs in a V formation c/w hydraulic in/out of work on the move
- Large flotation transport wheels
- 2 rows of vibro-flex tines c/w hydraulic inout of work
- Hydraulic level board
- 2 rows of 600mm DD rings which can be adjusted for angle and weight
Options
- 3 rows of vfm tines in lieu of 2 rows of discs
- Quick fit knock on points
- Single row of rings in lieu of double DD
- Rear drawbar
- Following harrow
- Hydraulic markers
- Broadcast kit for small seeds
- Extra sub-soil legs if required
- For different lay outs and other working components see 'Bespoke Quad-Till' page
| Width (m) | Folding | Weight approx kg | Min HP approx* tracks# | No. of subsoil legs |
|---|---|---|---|---|
| 3.0 | No | 5,500 | 240 | 4 |
| 3.6 | Yes | 7,500 | 288 | 5 |
| 4 | Yes | 8,000 | 320 | 6 |
| 5 | Yes | 10,000 | 400 | 7 |
| 6 | Yes | 12,000 | 480 | 9 |
Prices available on request
*With legs 10" (250mm) deep
#Wheeled tractors may require higher horse power
A natural progression from the trailed press and sub-soilers, the Quad-Till has been developed to achieve a one pass cultivation system to reduce establishment costs.
The video below shows, firstly, a 5m Quad-Till on a Quadtrac 9380
and then, a 4m Quad-till on a Ford fw60.
